interfacial adhesion中文什么意思
界面粘附
- interfacial: adj. 1.界面的，面际的。 2. ...
- adhesion: n. 1.黏附，附着，胶着。 2.黏 ...
- interfacial layer (= interfacial zone): 界面层
例句与用法
- The wood surface polarity is another important factor influencing the interfacial adhesion across the wood / plastics interface
木材的表面极性（ y 。 ’ ）是对木塑复合界面性能有影响的另一个重要因子。 - The results show that proper control the motion mode of the particle in plating results in many strengths of the nickel films , such as good uniformity , high compactness , and strong interfacial adhesion
溅射镀膜时，通过控制空心微珠的运动方式，在空心微珠表面沉积了一层均匀性好、附着力强和致密性好的金属镍膜。 - The synthesis of modified polyolefin which grafted polar groups ， effects on interfacial adhesion of glassfiber reinforced polyolefin composite systerm and applications in glass fiber sizing were introduced in this paper
本文介绍了接枝极性基团的改性聚烯烃的合成及其对玻璃纤维增强聚烯烃复合体系界面结合的影响以及在玻璃纤维浸润剂配方中的应用。 - Consequently , with increasing mmt content , the tensile strength and young ' s modulus of hdpe - g - aa / mmt nanocomposites increased , while that of hdpe / mmt composites decreased . moreover , the addition of mmt to hdpe - g - aa decreased the melting temperature and the degree of crystallization of the matrix . these changes may be attributed to high interfacial adhesion between hdpe - g - aa matrix and exfoliated clay , which reduces the mobility of crystallizable pe chain segments , and subsequently reduces the crystallization ability
研究结果表明： mmt在hdpe中不能达到纳米级分散，而在hdpe - g - aa中， mmt能以插层型利剥离型的结构存在，这主要是由于极性的丙烯酸接枝在hdpe上提高了后者的极性，而且能与mmt上的活性基团进行化学反应，从而提高了pe链进入mmt层间的可能性，使mmt在基体中达到纳米级分散。 - In addition , a new analytical method was used to solve the shear strength of the fiber / epoxy interface . the result showed good agreement with that from the kelly - tyson equation . meanwhile , according to the sfc tests of the single fiber reinforced epoxy matrix composites treated by four types of surface treatments , the interfacial adhesion conditions were estimated by critical fiber length , interfacial shear strength and single fiber microdamge mode
此外，文中对单纤维复合材料断裂实验运用了新的解析方法，求解了玻璃纤维环氧复合材料界面的剪切强度，与kelly - tyson等式方法求得的界面剪切强度有着很好的一致性；同时，对四种不同表面处理剂处理的单纤维复合材料断裂实验进行了分析，从临界纤维长度、界面剪切强度和单纤维断裂实验中纤维断点周围基体形貌评价了界面的粘结情况。
